Created: 16 September 2015
- Ranges 2.5 mbar to 700 bar
- Accuracy from 0.025% full scale (FS)
- Integral combined pressure/vacuum pump
- Dual readout: input and output
- 4 to 20 mA loop test: auto step and ramp
- Intrinsically safe (IS) version
- RS232 interface and fully documenting version
- Remote pressure sensors
A highly accurate and easy to use calibrator is only part of the solution for improving overall data quality and working efficiency. The DPI 610 and DPI 615, with data storage and RS232 interface, reduce calibration times and eliminate data recording errors. The DPI 615 also provides error analysis for field reporting of calibration errors and pass/fail status. In addition, procedures downloaded from a PC automatically configure the DPI 615 to pre-defined calibration and test routines.
The DPI 610/615 Series combine practical design with state-of-the-art performance, summarized as follows:
||0.025% FS for ranges 200 mbar to 700 bar
||2.5 mbar to 700 bar including gauge, absolute and differential versions
|-850 mbar to 20 bar
|0 to 400 bar
||Pressure, mA, V, switch state (open/closed) and ambient temperature
||Pressure, mA step, mA ramp, mA value
||10 and 24 VDC (not IS version)
|Documenting (DPI 615 only)
||Error analysis with pass/fail status and graphs.
two-way PC communication for transferring
procedures and results
|Remote pressure sensors
||Up to 10 digitally characterized sensors per calibrator
GE’s knowledge of customer needs, combined with innovative design, results in high performance, multi-functional calibrators that are simple to use. The key to simple operation is the Task Menu. Specific operating modes such as P-I, switch test and leak test are configured at the touch of a button by menu selection.
Featuring highly reliable pneumatic and hydraulic assemblies and self-test routines, the DPI 610/615 Series can be relied upon time and time again for field calibration in the most extreme conditions.
The DPI 610 and DPI 615 have been designed for ease of use whilst meeting a wide range of application needs including calibration, maintenance and commissioning. The Intrinsically Safe versions, certified to European and North American standards for use in hazardous areas, reduce response times to breakdowns and emergencies by removing the need for ’Hot Permits‘ and gas detection equipment. This
gives peace of mind to all those responsible for safety within hazardous areas.
The dual parameter display shows the Input and Output values in large clear digits. A unique integral handle provides a secure grip for on-site use in addition to a shoulder strap which is also designed to allow the instrument to be suspended for hands-free operation.
Any technician can use these calibrators without formal training, such as a novice on an emergency call out, or those familiar with the DPI 601. By selecting basic mode the calibrator is configured to source pressure and measure mA or V, with all non-essential keys disabled.
Remote Pressure Sensors
By adding up to 10 external sensors (one at a time) the working ranges of the DPI 610 and DPI 615 can be extended. With modules from 2.5 mbar to 700 bar, sensors are available to suit most applications.
As a leading manufacturer of pressure sensors GE has applied the latest silicon technology and digital compensation techniques to develop these sensors.
Remote sensors offer a cost-effective means of expanding the capabilities of the DPI 610 and DPI 615, for example, in the following applications:
• Low pressure
• Differential pressure
• Wide range, high-accuracy
• Test-point monitoring
• To prevent cross contamination
• To configure pneumatic calibrators for high pressure hydraulic systems
• To configure hydraulic calibrators for low pressure pneumatic systems
Buy: DPI610/DPI615 - pressure calibrator, price: ---- euro